Extremely good overall protection performance
- For gravel resistance
- Very high abrasion resistance
- Very good corrosion protection
- High sound deadening effect
Very easy handling
- Original structure can be reproduced
- Fine and coarse structures can be sprayed
- Sandable after drying
- Overpaintable
- Suitable for oven drying
Resistance against
- Water
- Salt spray
- Oil
- Soft bases
- Acids

Processing information

Shake well before use
The surfaces must be clean, dry and free of dust, rust and grease
Spray the coating with a hand- or pressure gun
Product dries at room temperature
Warm circulating air at 30-35 °C can be used for faster drying
Problem-free oven drying up to +60°C
Fresh product on equipment can be removed with water. Thinner: Water (max. 3%)
When the product is to be painted the recommended method of drying is warm circulating air (30 – 35 ºC) during 1 hour
For thicker layers 12 – 24 h drying time at room temperature is recommended
Once it is dry the product can be painted with all standard 2K-acrylic, basecoat lacquers or water based lacquers

Advice

Drying too fast may result in adhesion loss
For 2K lacquers the use of primer is advised

Technical Data

Property	Value
Chemical base	Aqueous synthetic dispersions, fillers and additives
Thermal stability (with predefined units)	-25 °C - +80 °C
Usage	± 0,5 kg/m2 ≈ ± 0,5 litre/m2
Curing Method	Water Evaporation
Dry after	±20°C, 65% RH: Approx. 90 minutes (±500 μm), ±60°C, oven: Approx. 17 minutes (±500 μm), ±60°C, IR: Approx. 13 minutes (±500 µm)
Completely cured after (20°C, 65% RH)	Approx. 7 days (±500 μm)
Salt spray test (DIN 50021) (multi-valued)	240 hours, Ri 0 at 350 μm dry layer
Gravel test (SAE-J400 method)	7A – 7B at 350 μ dry layer thickness
Bending test (DIN 53152, +70°C)	No cracks, no loss of adhesion
Bending test (DIN 53152, -30°C)	No cracks, no loss of adhesion
Adhesion test (DIN 53151)	Gt 0 with 2C acrylic, base coat & water based systems
Shelf life month	12 months
Density, at	1.05 g/ml
Packaging Icon	C/FE-91
Color	Black
Container	Can
Content	1 I

Datasheets & Downloads

Language

Type

Art.No.

Berner understands the pressure of time in construction work. Challenges can occur during the whole process of structural construction, installation or finalization of a new building or renovated building.

Reviews

(0)