Alert message

Quick Entry

You are a Berner-Powershopper? Simple add a product by entering the article number!

Article no.
Comma separated article numbers
Login
Register now

Let op: gewijzigde openingstijden tijdens de feestdagen!

100
Delivery within 24 to 48 hours
Guaranty and Replacement
Safe Shopping
recommend article
recommend the following article:
Chipboard screw EASYfast WAVE plus
Art.No. 410012

separate multiple mail address using a comma.

* mandatory fields

Details

Application Areas:

Joiners/ carpenters/ roofers/ (prefabricated) timber construction companies

Furniture manufacturings, fittings, interior construction (e.g. panellings), timber frame constructions (Ø 6.0), etc.

Countersunk head with milling pockets also usable in angles and fittings

Installation indoors or in dry areas of wet rooms

Outdoors without direct weathering

Advantages:

  • Quick and exact positioning
    • Reduced point angle, particularly advantageous for overhead and one-hand screwings
  • Faster grip and screwing-in
    • With tip-starting thread
  • Reduced wood crackings/ splinterings
    • With special chip breaker rib geometry (dimensions Ø 4.0-6.0) at screw tip, especially suitable for close-to-the-edge screwings
  • Appealing surfaces
    • Patented countersunk head with milling pockets for optimized picking up of screwing chips
  • Energy-saving
    • Reduced screwing torque due to single thread with special flank angle geometry
  • Optimal power transmission
    • With special BERNER "Toko" bit geometry for a better fit in drive
  • Maximum safety and high product quality
    • Ensured by ETA-12/2080 and external independent testing institute
ETA-Logo
Chipboard screw EASYfast WAVE plus

Processing information

Please note maximum breaking torque for each thread-Ø in respective DoP / ETA
For screw connections in load-bearing timber structures, installation specifications of ETA-12/0280 must be considered
Load-bearing, approval-relevant timber constructions to be calculated by structural engineer with ETA of applied screws
Fixing of thermal insulation must also comply with local applicable national regulations
Only countersunk head screws (Ø 6.0) allowed for connecting wood-based materials to roof-mounted insulation systems
To further increase load-bearing capacity, washers acc. to ETA-12/0280 may be used
For on-roof fastenings, screws have to be driven into the rafter in one sequence through battens and thermal insulation material without pre-drilling (ETA-12/0280: A.1.4. installation provisions)
Rafter width: min. 60 mm
screw/ center distance: max. 1750 mm
Insulation thickness: min. 300 mm
Compressive insulation strength: min. 0.05 N/mm²

Advice

Applicable with or without pre-drilling (pre-drilling-Ø ≤ screw core-Ø)
Pre-drilling usually not necessary for screwing into softwoods (e.g. spruce, pine, fir)
When using hardwood, pre-drilling is recommended to prevent screw breaks
Datasheets & Downloads

Productadvisor for Houtschroeven

Verschillende toepassingsgebieden vereisen verschillende schroef- en draageigenschappen van een schroef. Opmerking: Voorboren wordt met name aanbevolen voor schroeven die zeer dicht bij de rand komen of om het risico op splijten te verminderen.

Reviews
Reset all filters
Reviews in Detail
more
less
Was this information useful?
0
0
Note: This rating has been translated automatically
Spaanplaatschroef
zeer goede spaanplaatschroef
more
less
Was this information useful?
0
0
Note: This rating has been translated automatically
Onze aanbevelingen voor u:
Compare products ()