Alert message

Login
Register now

Let op: gewijzigde openingstijden tijdens de feestdagen!

1
Delivery within 24 to 48 hours
Guaranty and Replacement
Safe Shopping
recommend article
recommend the following article:
Plasterboard filler
Art.No. 422664

separate multiple mail address using a comma.

* mandatory fields

Details

Application Areas:

Filling of gypsum board joints

Finishing of Joints between gypsum boards

Plastering of screw heads in drywalls

Most suitable for smaller drywall jobs or repair of drywalls, especially in already finished buildings (no mixing, no dirt)

Perfect adhesion also on Concrete, Masonry and porous substarates for joint filling applications

Advantages:

  • Simplyfies work enormously
    • Ready to use solution
    • Avoid Dirt - no mixing with water
    • Avoid reinforcement tapes
  • Very easy handling
    • Easy to apply and to smoothen
    • Not start hardening while applying
    • Paintable, sandable after 4-6 h
  • Premium approved quality
    • Tested according EN 13963 (class 4A)
    • Very high crack resistance
Plasterboard filler
Plasterboard filler

Processing information

Avoid mixing the product in the bucket!
Before applying the filler soften it between spatulas
Press the filler into the joint
Smoothen the surface with a spatula and thereby remove excess of the material
Two layer of the filler are recommended for a smooth surface
Sanding, plastering or painting can be done after drying 4-6 h

Advice

Tapeless application not possible with bevelled cut edge or mixed type edges (like tapered, Half rounded)
Protect from direct sunlight
Close after use the bucket carefully
Drying time depends on temperature, humidity, porosity of the substrate and thickness of the applied layer
For long term use a clean foil can be pressed onto the product to protect it against drying
Uncured product can be easily removed by water

Technical Data

Property Value
Field Of Application / Substrate Plasterboards
Chemical base Acrylic
Smell Odorless
Application temperature (with predefined units) 10 °C - 35 °C
Thermal stability (with predefined units) 5 °C - 75 °C
Volume loss 3 %
Curing time 4-6 hours
Joint width, at 3 mm
Consumption, to 0.2 g/m²
Drying time <10 min
Approval EMICODE EC1<sup>PLUS</sup>
Shelf life month 24 months
Density, at 0.44 g/cm³
Shore hardness A (approx.) 70
Color white
Container bucket
Content 5 L
Datasheets & Downloads
Reviews
Reset all filters
Reviews in Detail
|   Markus
Doodeenvoudig
De consistentie van de massa is moeilijk te beschrijven en verbaast. Breng "dry foam" aan op de spatel zoals beschreven en druk in de voegen. Trek het deksel eraf KLAAR!
more
less
Was this information useful?
0
0
Note: This rating has been translated automatically
Compare products ()