Due to the ongoing transition to our new brand at BERNER, there may be differences in the visual appearance of our products as we finalize their design. Please note that the product illustration provided may not perfectly match the purchased item. It's possible that the delivered product may feature the blue BERNER design rather than the illustrated new orange design. However, rest assured that the product's features and benefits remain unchanged and valid regardless of the design variation. We encourage you to start using it without hesitation!

Delivery within 24 to 48 hours

Guaranty and Replacement

Safe Shopping

recommend article

recommend the following article:

Fire resistant PU foam gun Premium

Art.No. 1002897

mail address of recipient(s)

separate multiple mail address using a comma.

commentary:

* mandatory fields

Details

Application Areas:

Fire-resistant sealing and filling of linear joints, voids and gaps to reinstate the fire resistance performance of wall and floor constructions

Suitable for rigid wall constructions and rigid floor constructions

For use in joints from 8 mm to 30 mm wide

Joint widths up to 40 mm when combined with Berner fire-resistant silicone oxime

Professional fire stopping and sealing applications

Fire resistant classification: Fire resistance classifications up to EI 240 (4 hours) in approved joint constructions. Refer to ETA 23/0677 and the relevant classification reports. Fire resistance up to EI 180 in joints up to 40 mm when combined with BERNER Fire Resistant Oxime Silicone. Fire resistance up to 60 minutes in a 20 mm joint as a standalone solution. Fire resistance classifications depend on the joint design, construction type and installation configuration. Always refer to the relevant classification and test reports

Advantages:

Certified high performance
- EN 1366-4 tested and approved
- ETA-certified solution (ETA-23/0677) for linear joint and gap seals
- Fire behaviour classification B1
- EC1 Plus certified for very low emissions
- A+ classification for indoor air quality
- Shelf life up to 18 months when stored correctly
Fast and precise gun application
- Tack-free time after 10-12 minutes
- Excellent adhesion to common construction substrates
- Controlled expansion for clean and efficient installation
- Can be cut, finished and overpainted after curing
- Easy and accurate application with a foam gun
Fire protection combined with sound insulation
- Sound insulation tested according to EN ISO 10140-2
- Acoustic performance up to Rs,w 53 dB
- Helps improve both fire protection and acoustic comfort

Processing information

Surface preparation: Substrates must be clean, dry and free from dust, oil and grease. Lightly moisten substrates before application to improve adhesion and foam cell structure
Application: Recommended can temperature: +15 °C to +25 °C. Application temperature: +5 °C to +35 °C
Shake the can vigorously at least 20 times before use
Attach the canister to a suitable foam gun and apply with the valve pointing downwards
Fill cavities approximately 50% full. The foam will expand during curing
For larger joints, apply in multiple layers and allow 15-30 minutes between applications
Lightly moisten each layer before the next application
Protect eyes and wear suitable gloves and protective clothing during use
Cleaning: Fresh foam can be removed immediately. After curing, excess foam can be trimmed with a knife or spatula and the surface can be finished. Clean foam guns after use

Advice

Use only in well-ventilated areas
Store the can upright between +5 °C and +25 °C
Pressurised container. Protect from sunlight and do not expose to temperatures above +50 °C
Keep away from heat, sparks, open flames and other ignition sources. Do not smoke during use
Limitations: Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Not suitable for permanent water load. Not suitable for use in cavities with insufficient moisture
Please note that from 24 August 2023, appropriate training on the safe handling of diisocyanates must be completed prior to use. For more information on the training, please visit
www.safeusediisocyanates.eu

Technical Data

Property	Value
Cutable after	30 min
Sound insulation value	53 dB
Certificates	CE & RoHS, Declaration of conformity, European Standard, UL
Content	750 ml
Color	Pink
Chemical base	PU
Density, at	20 kg/m³
Application temperature (with predefined units)	5 °C - 35 °C
Skin building time	min
Shelf life	18 mois
Packaging Icon	FE-40
Thermal stability (with predefined units)	-40 °C - 90 °C
Cure time (with predefined units)	80 - 100 min
Joint width, at	30 mm
Box yield	40 l
Fire behavior	Hardly flammable according to DIN 4102
Fire Protection Product, Type	Foam
Container	Can