Bonding and sealing in automotive and vehicle body segment. Assembly bonding of parts exposed to dynamic stress and where high initial tack is required

Suitable for substrates such as aluminium, steel (including phosphated, chromated and galvanized), metal primers and coatings of ceramic materials and many plastics

Examples:
Sandwich elements, articulated trucks, spoilers, bonding of casing elements, bonding of floor-elements on steel frames, elements in front and back areas on steel frames, sealing of overlapping sheets, hatches, tailgates, etc.

Advantages:

Quick and easy application
- Strong initial and permanent bond
- Can be applied on various substrates without primer
- Achieves functional strength in 4 h
Flexible and long-lasting
- Can be painted over
- Usability is independent from surrounding temperature or humidity
- UV stable and highly chemical- and weathering-resistant
Improved work safety
- No CLP label
- Isocyanates free
- Neutral in smell

Processing information

Surfaces must be dry, clean and free of dust and grease
Insert the cartridge into the dispensing gun and then close. For processing this product any standard cartridge gun can be used
Twist off the cap, connect and tighten the mixing nozzle
Push the material out with the dispensing gun and discard the first few grams, as they are not yet mixed at 1:1
Fixture time approx. 20 minutes
Tack free after approx. 30 minutes
Pot life approx. 40 minutes
Workable after approx. 3 hours
Curing time approx. 4 hours

Advice

Mixing tip included

Technical Data

Property	Value
Shear Strength (DIN 53283)	2 N/mm²
Application temperature (with predefined units)	+5 °C - +40 °C
Application temperature, to	40 °C
Pot life	40 min
Application temperature, from	5 °C
Elongation	500%
Gap Width	40 mm
Mixing ratio	1:1
Chemical base	MS polymer
Tensile Strength	2.4 N/mm²
Shelf life month	12 months
Curing time (+23°C / 50% RH)	4 h
Content	Millilitre
Packaging Icon	PP-05
Shore hardness A (approx.)	40
Adhesive, Type	MS polymer
Color	Black
Thermal stability (with predefined units)	-40 °C - +90 °C
Container	Cartridge
Content	280 ml
Processing Time	20 min